Description

330-0016

Lift: .509″

Chain Drive Camshaft Kit for 1999-’06 HD^® Big Twins except ’06 HD^® Dyna^®

The 509 Touring Cam is designed as a bolt-in, high torque cam for 1999-’06 models, except 2006 HD^® Dyna^®. 180 psi cranking compression, no need for compression releases. For 88 CID engines with stock compression ratio. Idle-4500 rpm.

 Can be used with stock valve springs.

With the current popularity of baggers, it’s no surprise that the S&S 551 cams for Harley-Davidson^® touring bikes have become a favorite with late model bagger riders. The only problem is that, due to the .550″ lift, the 551 cams can’t be installed in early (1999-’04) Twin Cam 88^® engines without also installing a set of high lift valve springs. That means that the heads would have to come off just to install a cam. That’s a lot of work and added expense!

Based on the success of the 551 cams, S&S has come up with new 509 bolt-in torque cams that work with stock valve springs in 1999-’04 engines. Like the S&S 551 cams, the new 509 cams are great for low and  midrange torque, but the 509 cam’s lower lift allows them to be bolted into stock 1999-’04 engines with stock valve springs. That saves a lot of time and money on the installation, which makes the S&S 509 a lot  more attractive to owners of older Twin Cam 88 powered bikes. Of course, the 509 cam also works great in 2005-’06 88″ engines, except 2006 HD^® Dyna^® models. Available in chain drive and gear drive versions.